General Chemicals Corp 12336 Emerson Dr.Brighton
Michigan (MI) 48116, USA USA: 866-623-5600 Overseas: 248-587-5600 Fax: 248-587-5606 Email: sales@generalchem.com
High performance vanishing Oils,
Vanishing Lubricants, Evaporative Lubricants
High
performance vanishing Oils, Vanishing
Lubricants, Evaporative Lubricants
: Metal Forming lubricants For Aluminum , Copper & Brass
It is
advantageous to use Vanishing Lubricants
that disappears after it has done its job.
These materials leave a light coating of
lubricant on the part during processing and
then evaporate shortly thereafter. In many
cases these vanishing lubricants can
completely eliminate cleaning operations.
Our vanishing oils will not turn tacky or
gummy, have mild or no odor and are designed
to always stay fluid. Vanishing lubricants
can be used on ferrous and nonferrous
metals.
Products are shipped as super concentrates
for savings in freight costs to 65 countries
on 5 continents.
Ultra-high performance vanishing Oils:
Recent developments in advanced lubricant
technology has allowed us to engineer
advanced vanishing oils with significantly
higher performance over traditional solvent
based lubricants. These lubricants have the
following characteristics and benefits:
Ø
It performs as High Performance mineral
based lubricants, and subsequently leaves
the parts non-oily for further handling
Ø
Fast drying time due to rapid evaporation
rate
Ø
Non-oily film due to special additives
enables handling and welding without
degreasing
Ø
Weld-able, can be welded through with no
adverse fumes and anti spatter performance
High Performance
a. Aluminum (+alloys) 1mm-3mm
b. Zintec 1mm-3mm
c. Stainless (304, 316, etc) 1mm-3mm
d. Mild steel (Hot Rolled (HR4) , S355
(50B)) 1mm-6mm
Clean in use due to the absence of oily
residues - excellent corrosion
prevention.....
:
1.To Whom It May Concern: We are looking to
buy vanishing oil/lubricant for stamped
parts made from .070-thickness plain hot
rolled steel. We produce these parts in the
millions, so we will are looking for a large
volume of the lubricant. The part is 3” wide
by 6” long. The oil/lubricant must protect
our tooling and totally evaporate. Parts
must be completely dry for the painting
process. What would you recommend?
Vanishing
Oils, Vanishing Lubricants, Evaporative
Lubricants and Disappearing Lubricants :
Viscosity for Evaplubes is 15 to 16.5 seconds on Zahn #2 cup. This viscosity is 0 in centistokes.
Sometimes it is advantageous to use a lubricant that disappears after it has done its job. These materials leave a light coating of lubricant on the part during processing and then evaporate shortly thereafter. In many cases these lubricants can completely eliminate cleaning operations. Our vanishing oils will not turn tacky or gummy, have no odor and are designed to always stay fluid. Recommended for use on virtually all metals.
Products
High performance vanishing Oils,
Vanishing Lubricants, Evaporative
Lubricants
Chlorine Free: For light duty, thin gage (.001 to .060); blanking, fin forming. high flash solvent based forming lubricant developed for the aluminum heat exchanger industry, where vacuum or thermal de-oiling process are used.
Chlorine Free: For light duty, thin gage (.001 to .060); blanking, fin forming. high flash solvent based forming lubricant developed for the aluminum heat exchanger industry, where vacuum or thermal de-oiling process are used.
Chlorine Free: For Medium duty blanking, stamping, very shallow draws, fin forming. developed for the heat transfer and air conditioner industries used for fin forming, blanking, and light operations. Light duty stamping and drawing ferrous and nonferrous metals.
Metals: Aluminum, copper, stainless steel, brass, mild (1010, 1008) and silicone steel.
Solvent: Low viscosity Vanishing oil Dilution: As supplied
Chlorine Based :General purpose "Evaporative Lubricant" for light to Medium duty forming of all metals. Virtually Requires no post cleaning and No post heat treatment. Ideal to bend or stamp painted stock. Has less odor than some other vanishing lubricants.
Metals: For All Metals Solvent: Vanishing oil Dilution: As supplied
General Chemical specializes in formulating vanishing oils motor oil and solvent based metal working lubricants. Vanishing oils evaporate leaving the surface dry and oil free; they eliminate cleaning and reduce costs. Some medium to heavy duty vanishing oils may leave a miniscule film, which generally does not require removal. All vanishing lubricants can be used on ferrous and nonferrous metals.
Vanishing Oil is a
solvent based lubricant. It leaves a thin
imperceptible film of lubricant. Vanishing
Lubricant facilitates a clean die release of
thin sheet or roll stock. The solvent
carrier in Vanishing oil generally dries in
one to four hours. Normally, cleaning is not
required after using this product.
High performance
vanishing Oils, Vanishing Lubricants, Evaporative
Lubricants
:
