Products Rss feed
  Vanishing Oils
  Soluble Oil
 
OilBased Lubricants
  Synthetic Lubricants
 
RollingMill Lubricants
 
Metal Cleaning
 
Copper Brass Processing
 
Aluminium Processing
 
  General Chemical has a complete line of Peelable Masks to meet your challenging requirement
 
  Vanishing Oil  
 
vanishing lubricants,vanishing oil copper Brass Lubricants
 
  VANISHING LUBRICANTS, VANISHING OILS, EVAPORATIVE LUBRICANTS: Metal Forming lubricants For Aluminum , Copper & Brass           
   
  Choosing the proper metal forming lubricant and metal stamping for non ferrous metals such as Aluminum, copper brass has become a difficult, complicated decision. Factors that influence choosing the right lubricant are: type of alloy, severity of the metal forming operation, metal stamping, application method and subsequent operations. General Chemical Corp. is an expert at solving metal forming or metal stamping problems. For a Aluminum lubricant or copper brass lubricant recommendation contact General Chemical; a proven world class leader in Aluminum lubricants, Motor oil, Synthetic Lubricants and copper brass lubricants.

General Chemical offers a complete line of Aluminum lubricants and copper brass lubricants. The product line discussed below is design to handle the most stamping and deep drawing operations; however General Chemical can formulate lubricants to meet special requirements. These Aluminum lubricants and copper brass lubricants are available in 5 gallon pails, 55 gallon drums and 300 gallon totes.
 
  VANISHING LUBRICANTS, VANISHING OILS, EVAPORATIVE LUBRICANTS :  
  Viscosity for  Evaplubes is 15 to 16.5 seconds on Zahn #2 cup. This viscosity is 0 in centistokes.

Sometimes it is advantageous to use a lubricant that disappears after it has done its job. These materials leave a light coating of lubricant on the part during processing and then evaporate shortly thereafter. In many cases these lubricants can completely eliminate cleaning operations. Our vanishing oils will not turn tacky or gummy, have no odor and are designed to always stay fluid. Recommended for use on virtually all metals.
 
 
arrow Products
arrow Applications
Evap-Lube 2200
Chlorine Free: For Light duty blanking, stamping, very shallow draws and metalworking.

Metals: Aluminum, copper, stainless steel brass, mild (1010, 1008) and silicone steel.

Solvent:
Low Viscosity Vanishing Oil Dilution: As supplied
Evap-Lube 2231
Chlorine Free: For light duty, thin gage (.001 to .060); blanking, fin forming. high flash solvent based forming lubricant developed for the aluminum heat exchanger industry, where vacuum or thermal de-oiling process are used.

Metals: Aluminum, copper, stainless steel brass, mild (1010, 1008) and silicone steel.

Solvent:
Thermal De-oiling type, Low Viscosity Oil  Dilution: As supplied
Evap-Lube 2240

Chlorine Free: For Medium duty blanking, stamping, very shallow draws, fin forming.  developed for the heat transfer and air conditioner industries used for fin forming, blanking, and light operations. Light duty stamping and drawing ferrous and nonferrous metals.

Metals: Aluminum, copper, stainless steel, brass, mild (1010, 1008) and silicone steel.

Solvent:
Low viscosity Vanishing oil  Dilution: As supplied
Chlorine Free: Mild EP. For light to medium duty blanking, stamping, very shallow draws, laminating. engineered for ferrous and non ferrous metals. Used for forming, blanking, roll forming and perforating.

Metals:
Aluminum, copper, stainless steel, brass, mild and silicone steel.

Solvent: Vanishing oil  Dilution: As supplied
Chlorine Based :General purpose "Evaporative Lubricant" for light to Medium duty forming of all metals. Virtually Requires no post cleaning and  No post heat treatment. Ideal to bend or stamp painted stock. Has less odor than some other vanishing lubricants.

Metals:
For All Metals  Solvent: Vanishing oil  Dilution: As supplied
 
  General Chemical specializes in formulating vanishing oils motor oil and solvent based metal working lubricants. Vanishing oils evaporate leaving the surface dry and oil free; they eliminate cleaning and reduce costs. Some medium to heavy duty vanishing oils may leave a miniscule film, which generally does not require removal. All vanishing lubricants can be used on ferrous and nonferrous metals.  
     
 
Head Quarters
General Chemical Corp.
12336 Emerson Dr. Brighton, Michigan(MI.) 48116, USA
USA:
866-623-5600
Overseas:
248-587-5600
Fax : 248-587-5606
E-Mail To Us
Key Word Search
Other Links
  News Letters
  Press Releases
  FAQ s
  Distributor Opportunity
  Private Label
Terms & Conditions | Privacy Policy | Links | Warranty
Home | Products | Shop Online | MSDS | Contact Us| Company | Site Map |