vanishing oils,vanishing lubricants,evaporative lubricants vanishing oils,vanishing lubricants,evaporative lubricants vanishing oils,vanishing lubricants,evaporative lubricants vanishing oils,vanishing lubricants,evaporative lubricants vanishing oils,vanishing lubricants,evaporative lubricants vanishing oils,vanishing lubricants,evaporative lubricants
 
 Vanishing Oils
   Soluble Total Dry Film  Vanishing Oil
 
   High Performance
 Vanishing Oil
   High Speed Vanishing Oil
 
 Solvent-Based  Vanishing Oil
   Thermal Vanishing Oil
 
General Chemicals Corp
12336 Emerson Dr. Brighton
Michigan (MI) 48116, USA
USA: 866-623-5600
Overseas: 248-587-5600
Fax: 248-587-5606

Email:
Vanishing Oils, Vanishing Lubricants ,Evaporative Lubricants
Vanishing Oils, Vanishing Lubricants ,Evaporative Lubricants
 
  ALUMINUM PROCESSING  
 
General Chemical Corp. offers a complete line of products formulated for aluminum processing. Our Aluminum cleaners & Aluminum lubricants products have found worldwide acceptance for use in machining, stamping, drawing, cleaning and extruding aluminum. The Aluminum lubricants/ machining fluids are emulsifiable oil concentrates which provides exceptional boundary, polar, and extreme pressure lubricity. They have a unique biocide package which results in long sump life and odor free operation.

Our Aluminum lubricants for stamping and drawing  are used for light and heavy duty forming operations. Because of its superior lubricity parts are produced with excellent surface finish and accurate dimensional stability.

The products discussed below will meet the requirement of most aluminum processing; however, specially formulated products are available.
Aluminum Lubricants,vanishing lubricants,synthetic lubricants
 
  buy now  
  VANISHING LUBRICANTS, VANISHING OILS :  
 
arrow Products
arrow Applications
arrow3
Evap-Lube 2200
Chlorine Free: For Light duty blanking, stamping, very shallow draws and metalworking.

Metals: Aluminum, copper, stainless steel brass, mild (1010, 1008) and silicone steel.

Solvent:
Low Viscosity Vanishing Oil Dilution: As supplied
arrow3
Evap-Lube 2231
Chlorine Free: For light duty, thin gage (.001 to .060); blanking, fin forming. high flash solvent based forming lubricant developed for the aluminum heat exchanger industry, where vacuum or thermal de-oiling process are used.

Metals: Aluminum, copper, stainless steel brass, mild (1010, 1008) and silicone steel.

Solvent:
Thermal De-oiling type, Low Viscosity Oil  Dilution: As supplied
arrow3
Evap-Lube 2240
Chlorine Free: For Medium duty blanking, stamping, very shallow draws, fin forming.  developed for the heat transfer and air conditioner industries used for fin forming, blanking, and light operations. Light duty stamping and drawing ferrous and nonferrous metals. Metals: Aluminum, copper, stainless steel, brass, mild (1010, 1008) and silicone steel.

Solvent:
Low viscosity Vanishing oil  Dilution: As supplied
arrow3
Evap-Lube 3010
Chlorine Free: Mild EP. For light to medium duty blanking, stamping, very shallow draws, laminating. engineered for ferrous and non ferrous metals. Used for forming, blanking, roll forming and perforating.

Metals:
Aluminum, copper, stainless steel, brass, mild and silicone steel.

Solvent: Vanishing oil  Dilution: As supplied
Chlorine Based :General purpose "Evaporative Lubricant" for light to Medium duty forming of all metals. Virtually Requires no post cleaning and  No post heat treatment. Ideal to bend or stamp painted stock. Has less odor than some other vanishing lubricants.

Metals:
For All Metals  Solvent: Vanishing oil  Dilution: As supplied
 
  LUBRICANTS : Aluminum Alloy Industrial  Lubricants   
 
arrow Products
arrow Applications
arrow3
GENDRAW 3520
Water based soap-fat paste. All drawing and stamping operations. For stainless steel, typical operations: Transmission pans, automotive hoods, and deep draws blanking.

Metals:
Steel, aluminum, copper and brass. Not for titanium. Dilution: 5 to 75% in H2O
arrow3
GENDRAW 3590
Synthetic, oil free, water reducible. Light to medium duty for stamping and drawing. Typical forming operations: medium deep draws, roll forming, tube bending, ammunition casings.

Metals: stainless steel, steel, (1010,1008) aluminum, copper, and brass. Not for titanium Dilution: 5 to 50%
arrow3
GENDRAW 3850
Oil based, medium to heavy duty drawing and stamping, “Honey oil.” Typical operations: Blanking thick stock, very deep draws

Metals:
Aluminum, stainless steel, steel, copper, brass. Not for titanium. Dilution: As supplied, may be diluted with oil
arrow3
GENKOOL 3920
Sulfurized extra heavy duty soluble oil. For very difficult machining and cutting operations. Typical operations: stamping, drawing, broaching, gear cutting , roll tapping and hobbing.

Metals:
Aluminum, steel, stainless steel, titanium, brass, bronze. Not for copper Dilution: Machining: 5 to 10% Dilution: Forming: 5 to 50%
Extra Heavy duty Synthetic lubricant Typical operations: deep drawing, stamping, blanking, tube forming and bending, roll forming.

Metals:
Stainless steel, steel, aluminum, copper, brass and titanium.Dilution: Dilute with water
 
  ALUMINUM  CLEANERS :  
  Our knowledge of appropriate chemistries and proper Aluminum  cleaner recommendations insure proper Aluminum cleaner selection. Twenty three years of experience in the Aluminum cleaning is an important part of General Chemical's heritage. From Aluminum cleaning by spray, soak tank and ultrasonic, Aluminum cleaners will help improve productivity and efficiency in any cleaning operation. The aluminum cleaning products supplied by General Chemical Corp. are inhibited from attacking aluminum. They are used at low temperatures, are free rinsing and are used at low concentrations. Non emulsifying cleaners allow oil to be skimmed from the cleaner, this results in long cleaner use life, easier waste treatment and reduced costs.

General Chemical has specialized in formulating vanishing lubricants. These products are used were minimal lubricity and no residual films are required. Are products are used on thin gauge ferrous and non ferrous metals. Typical applications for vanishing lubricants include blanking, drawing, roll forming and fin forming in radiator manufacturing.
 
  Aluminum Alloy Etchants And Aluminum  Cleaners:  
 
arrow Products
arrow Applications
arrow3
Aluminex 602
Non-foaming high pressure aluminum alloy spray cleaner

Solvent:
Water based alkaline  Dilution : 2%-5% by volume w/water
arrow3
Aluminex 3700
Heavy duty soak/spray aluminum cleaner alloy

Solvent:
Water based alkaline Dilution : 2%-5% by volume w/water
arrow3
Aluminex 5761
Soak/spray aluminum cleaner alloy

Solvent:
Water based alkaline  Dilution : 2%-12% by volume w/water
 
  Available in 5,15,55 gallon containers:  
     
  ALUMINEX 602: A low ph spray cleaner and corrosion inhibitor. Used on ferrous and non ferrous metals. The ph of the concentrate is 8. to 89. Used at 3 to 5% concentration. Free rinsing. non etching, low temperature.  
  ALUMINEX 5761: Used at 5 to 10% concentration at 100 degree to 120 degree farenheit.. . Recommended for cleaning aluminum radiator parts. non etching. Free rinsing.  
  ALUMINEX 5834: A Heavy-duty soak or spray cleaner non-emulsifying. Free rinsing. Can be used on ferrous and non ferrous metals. Concentration 5% to 10% at 120 degree to 200 degree Fahrenheit. Does not contain phosphate. Free rinsing.  
  ALUMINEX 7737: A non-emulsifying heavy duty soak tank cleaner. Contains silicate. Phosphate free. Non corrosive. To ferrous and non ferrous metals. non etching, free rinsing. Concentrations 5 % to 10 % at temperatures of 120 degrees to 200 degrees Fahrenheit.  
  ALUMINEX 3820: An acid based cleaner to remove hard water deposits from aluminum radiators and heat exchangers. Used at 5 % concentration at ambient temperature.  
  ETCHANTS :  
  Alumter 2680: A non Hydroflouric acid etchant, deoxidizer and cleaner. Safe to use. Non emulsifying, produces a very uniform etch. Used in soak tank or spray applications. Non emulsifying. Free rinsing. Used at 10% to 20% at ambient to 120 degree Fahrenheit. Non hazardous.  
 
testimonial icon TESTIMONIAL :
 
  Whether it’s an aqueous cleaner or vanishing oil for aluminum, we will work with you to make a product for your specific, demanding requirements. Additionally, we provide technical support for all our products. Whether you need answers to product questions, or help, General Chemical Corp. will be there for you before, during, and long after the sale.  
 
  Terms & Conditions | Privacy Policy | Links | Warranty | Sitemap | PRESS RELEASE | FAQ'S | DISTRIBUTOR OPPORTUNITY | PRIVATE LABEL